Welcome to the GMC Instruments China English website.
Technical characteristics
☆ Connection type: One-phase, 3-phase 3-wire balanced or unbalanced load or 3-phase 4-wire balanced or unbalanced load
☆ Measuring input for power
☆ Nominal voltage up to 500 V, nominal current 1 / 5 A
☆ 2 configurable analog outputs linear or kinked in a unipolar range of 0...20 mA / 4...20 mA or 0...10 V or a
☆ bipolar range of -20...0 mA or -10...0...+10 V
☆ Quick on-site programming using push buttons or via CB-Configurator software
☆ Simple on-site device operation
☆ Clear and well readable representation of measured data via LCD display
☆ Flexible communication and remote readout via integrated Modbus RTU interface
☆ DIN rail for top-hat rail mounting
Item number: 175316
Measuring Transducer for Power, Power Factor and Phase Angle, RS485, LCD Display
The SIRAX BT5400 is used to measure and convert active, apparent, reactive power, phase angle & power factor of a single phase or 3-phase AC system with balanced or unbalanced load into an proportional DC current or voltage output signal.
Technical characteristics
☆ Connection type: One-phase, 3-phase 3-wire balanced or unbalanced load or 3-phase 4-wire balanced or unbalanced load
☆ Measuring input for power
☆ Nominal voltage up to 500 V, nominal current 1 / 5 A
☆ 2 configurable analog outputs linear or kinked in a unipolar range of 0...20 mA / 4...20 mA or 0...10 V or a
☆ bipolar range of -20...0 mA or -10...0...+10 V
☆ Quick on-site programming using push buttons or via CB-Configurator software
☆ Simple on-site device operation
☆ Clear and well readable representation of measured data via LCD display
☆ Flexible communication and remote readout via integrated Modbus RTU interface
☆ DIN rail for top-hat rail mounting
