PROFITEST PRIME AC

Item number: M516H

Test instrument for testing the effectiveness of protective measures in electrical installations per IEC 60364-6, machines and systems per IEC 60204-1, low-voltage switchgear and controlgear assemblies per DIN EN 61439-1, PV systems per DIN EN 62446-1 and electric charging stations per DIN EN 61851-1.

The PROFITEST PRIME AC makes your investment decision easy because standards-compliant testing can be conducted on electrical installations per IEC 60364-6, on machines and systems per IEC 60204-1, on low-voltage switchgear and controlgear assemblies per IEC 61439-1, on PV systems per DIN EN 62446-1 and on electric charging stations per DIN EN 61851-1 with the accessories which are perfectly matched to the requirements.

Product Highlights

☆ Measurement in AC/DC systems

☆ Measurement of internal system resistance and fault loop resistance with high test current up to 690 V AC / 800 V DC without tripping RCD types A and B

☆ Low-resistance measurement for protective and equipotential bonding conductors with 200 mA, as well as automatic polarity reversal and 25 A

☆ Testing of RCD types A, AC, F, B, B+, EV, MI and G/R, as well as SRCDs and PRCDs

☆ Combined RCD test with continuously rising ramp, time to trip, tripping current

☆ Insulation measurement up to 1000 V with rising ramp

☆ Testing of RCMs and IMDs

☆ Measurement of leakage and differential current

☆ Measurement of temperature and humidity

☆ Voltage measurement, 1000 V AC/DC

☆ High-voltage testing: 2.5 kV AC, 500 VA, standard sequence, ramp function and pulse control mode

☆ Work safety concept for the inspector in accordance with DIN EN 50191 and EN 61557-14 with indicator lamp, emergency stop switch and key switch

☆ Mains and battery operation (with limited functionality)

☆ Bluetooth and USB interfaces

☆ Push-print function – transmission of the measured value after measurement

Your advantages

PROFITEST PRIME AC – versatile and future-proof

☆ Intuitive operation

☆ Efficient work

☆ Standards-compliant testing

☆ Legally secure documentation

PROFITEST PRIME AC – saves time and money

☆ As single test instrument for a broad range of applications

☆ All measurements without any bothersome replugging of the measurement cables

☆ Interchangeable test tips on the measurement cables

☆ Can be used all over the world thanks to language selection

PROFITEST PRIME AC – even 10 years down the road

☆ Future-proof thanks to firmware updates

☆ 10-year service guarantee

☆ DAkkS certificate issued by own calibration laboratory

☆ User support for questions about testing

PROFITEST PRIME AC – quick and easy report generation

☆ Cascadable, future-proof software concept

☆ Modern data management by means of customer and measurement data administration

☆ Creation of system structures – from the system all the way down to the measuring points

☆ Quick and easy generation of a legally secure report per ZVEH

PROFITEST PRIME AC – reliable measuring and testing

☆ Easy operation with rotary switch

☆ Predefined test sequences for structured testing

☆ Coded plugs assure error-free testing

☆ On-site help thanks to help function with wiring diagrams

☆ Measuring category: 600 V CAT III / 300 V CAT IV

☆ 4-wire measuring method – no compensation of the measurement cables is required

Applications

Standards-compliant testing of the effectiveness of protective measures in electrical installations per DIN VDE 0100-600, machines and systems per VDE 0113-1, low-voltage switchgear and controlgear assemblies per VDE 0660-600-1, PV systems per VDE 0126-23 and electric charging stations per VDE 0122-1.

Technical characteristics

☆ Broad-range measuring device for all alternating and 3-phase electrical systems with voltages of up to 1000 V and frequencies of 15.4 to 420 Hz

☆ Low-resistance measurement for protective and equipotential bonding conductors with 200 mA, as well as automatic polarity reversal and 25 A

☆ Insulation measurement up to 1000 V with rising ramp

☆ Measurement of internal system resistance and fault loop resistance with high test current up to 690 V AC / 800 V DC without tripping RCD types A and B

☆ Testing of RCD types A, AC, F, B, B+, EV, MI and G/R, as well as SRCDs and PRCDs

☆ Combined RCD test with continuously rising ramp, time to trip, tripping current

☆ Testing of RCMs and IMDs

☆ Measurement of leakage and differential current

☆ Measurement of temperature and humidity

☆ Voltage measurement, 1000 V AC/DC

☆ High-voltage testing: 2.5 kV AC, 500 VA, standard sequence, ramp function and pulse control mode

☆ Mains and battery operation (with limited functionality)

☆ Bluetooth and USB interfaces

☆ Push-print function – transmission of the measured value after measurement

Particularities

Innovative, global operating concept

Quick access to measuring and test functions via the rotary switch and softkeys

User-friendly

No time-consuming replugging of the measurement cables is required – no measuring cable mix-ups thanks to coded plugs

Modern data management

Comprehensive data management concept in combination with user software including customer and measurement data administration, test sequences, report generation and more

Unique storage concept

Creation of system structures – customers, systems, machines, distributors, RCDs, IMDs, RCMs, electrical circuits, earth electrodes, equipotential bonding rails, operating equipment and individual measuring points

Push-print function

Transmission of the measured value via Bluetooth/USB after measurement has been completed

Test sequences

Preparation of individual test sequences for quick and reliable testing of machines and systems

Universal interface

Bidirectional data exchange (USB), connection of a barcode scanner as well as temperature and humidity sensor (RS 232), Bluetooth/USB: push-print function

Universal use

Measuring and testing made easy thanks to extensive accessories and integrated rechargeable battery

Rugged housing

Compact, impact-resistant measuring case with trolley mount for easy transport

Delivery

1 PROFITEST PRIME AC
1 Probe for L with test probe and 4 m probe cable
1 Probe for N with test probe and 4 m probe cable
1 Probe for PE with test probe and 4 m probe cable
1 USB cable, 1 m 3 Alligator clips
1 Mains power cable, 1.5 m
1 Accessories pouch
1 Condensed operating instructions
1 Supplementary sheet with safety information
1 DAkkS calibration certificate