PROFITEST H+E EXPERT CHECK

Item number: M525R

Diagnostic Tester and Test Adapter for AC Charging Points per IEC 61851-1, VDE 0122-1

The PROFITEST H+E EXPERT CHECK is used to test AC charging points in charging mode 3 with type 2 connector socket or permanently attached type 2 cable.

Contribute to a safe future for e-mobility with the diagnostic tester and test adapter! The rugged instrument is distinguished by extended testing functionality and easy, user-oriented operation. In addition to functional testing of charging stations in accordance with DIN EN/IEC 61851-1 (VDE 0122-1), the new tester also facilitates electrical testing of the charging infrastructure. The PROFITEST H+E EXPERT CHECK is combined with instruments from the PROFITEST MF or PROFITEST MASTER IQ series to this end.

Product Highlights

☆ Diagnostics and test adapter in a single instrument

☆ Display of positive and negative PWM voltages

☆ Testing for PE interrupt with display of time to trip in accordance with VDE 0122-1 (IEC 61851-1)

Your advantages

☆ Combination with the tester reduces costs and saves time

☆ Simple, lightweight and rugged: suitable for mobile use

☆ Intuitive operation with display of results in plain text

☆ Error display with results for forwarding to service personnel

Applications

The instrument is used for service and maintenance of the AC charging infrastructure. The PROFITEST H+E EXPERT CHECK makes it possible for electricians to quickly and safely test the functionality electrical safety and personal protection of single and 3-phase AC charging points in charging mode 3 with type 2 socket or permanently attached type 2 cable.

Technical characteristics

☆ Testing of AC charging points in charging mode 3

☆ Connection to the charging socket or the type 2 plug of an AC charging point

☆ Measured values appear at the display in plain text

☆ Checking of vehicle states (CP states A, B and C), as well as phases, phase sequence, duty cycle and frequency

☆ Settings for maximum current carrying capacity of the charging cable (PP): 13, 20, 32 or 63 A and NC

☆ Fault simulation: diode test, CP-PE short-circuit (CP state E) and PE interrupt (standards-compliant interrupt with display of tripping time)

☆ Measurement inputs and earthing contact socket for connecting a test instrument and an external load

☆ 4 mm safety sockets

☆ Measuring category: CAT III 300 V

☆ USB port for charging the battery

☆ Multilingual (German, English, French)

Delivery

1 PROFiTEST H+E EXPERT CHECK (M525F)
1 charging cable (micro USB plug)
1 operating instructions